Leader LT4670 - Clearing Presets; Setting the Network

14 SYSTEM CONFIG MENU
139
14.2.7 Clearing Presets
To clear presets stored in the instrument, follow the procedure below.
Procedure
SYSTEM CONFIG > PRESET > DELETE
To clear a preset, follow the procedure below.
1. Select the preset to clear.
Select ALL or a number from NUMBER 0 to NUMBER 9.
2. Select OK.
14.3 Setting the Network
Under NETWORK on the SYSTEM CONFIG menu, you can set the network function.
14.3.1 Setting the Network
To select whether to enable the network function, follow the procedure below.
Procedure
SYSTEM CONFIG > NETWORK > NETWORK SETUP
Parameters
ENABLE / DISABLE
Initial value
ENABLE
2 . P R E S E T D E L E T E
| A L L
3 . D E L E T E A L L
■ O K □ C A N C E L
0 . S Y S T E M C O N F I G
|}

N E T W O R K ↲
2 . N E T W O R K S E T U P
■ E N A B L E □ D I S A B L E