Leader LT4670 - SDI Menu (SER02); PTP Menu (SER03)

15 STATUS MENU
163
15.3.4 SDI Menu (SER02)
SDI on the CONFIG menu shows settings related to the SDI option that have been specified on
the SDI CONFIG menu.
Table 15-6 | SDI menu
Item
Description
The SDI1 format that has been set with
FORMAT is displayed.
The same holds true for SDI2 to SDI4.
The SDI1 timing that has been set with
VERTICAL and HORIZONTAL is displayed.
The same holds true for SDI2 to SDI4.
The board ID and serial number of SDI 1/2 are
displayed in the top row, and the FPGA version
is displayed in the bottom row.
The same holds true for SDI 3/4.
15.3.5 PTP Menu (SER03)
PTP on the CONFIG menu shows settings related to the PTP option that have been specified on
the PTP CONFIG menu.
Table 15-7 | PTP menu
Item
Description
The PTP1 mode selected with MODE is
displayed.
The same holds true for PTP2.
The BMCA setting of PTP1 that has been
selected with BMCA SETUP is displayed.
The same holds true for PTP2.
The PTP1 profile selected with PROFILE is
displayed.
The same holds true for PTP2.
The MAC address of PTP1 is displayed.
The same holds true for PTP2.
The PTP1 ID is displayed.
The same holds true for PTP2.
The board ID and the serial number are
displayed.
[ C O N F I G ]
|}
S D I ( S E R 0 2 ) ↲
[ S D I 1 F O R M A T ]
|}
1 0 8 0 H D / 5 9 . 9 4 I
[ S D I 1 T I M I N G ]
|}
0 L 0 D
[ S E R 0 2 : 0 0 / 0 0 0 0 0 0 0 ] 1 / 2
|}
C 4 : 0 0 0 0 0 0 4 9 C 5 : 0 0 0 0 0 3 2 0
[ C O N F I G ]
|}
P T P ( S E R 0 3 ) ↲
[ P T P 1 M O D E ]
|}
E N A B L E L E A D E R
[ P T P 1 B M C A ]
|}
E N A B L E
[ P T P 1 P R O F I L E T Y P E ]
|}
S T 2 0 5 9
[ P T P 1 M A C A D D R E S S ]
|}
0 0 : 0 0 : 0 0 : 0 0 : 0 0 : 0 0
[ P T P 1 I D E N T I T Y ]
|}
0 x 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ S E R 0 3 : 0 0 / 0 0 0 0 0 0 0 ]
|}