Leader LT4670 - LOG Menu; Viewing the Log; Clearing the Log

15 STATUS MENU
165
15.4 LOG Menu
LOG on the STATUS menu is used to display and clear the log.
To display the LOG menu, press STATUS several times until the following menu appears.
15.4.1 Viewing the Log
To view the log, follow the procedure below.
Press the ▲ key to view newer log entries, the ▼ key to view older log entries, and the ◀ and
▶ keys to switch between date and time display and log display.
You can view up to 1000 entries from 000 to 999. Subsequent entries that occur overwrite the
oldest entries.
The date and time of the log will be the date and time selected with TIME SOURCE on the
REFERENCE CONFIG menu.
Procedure
STATUS > LOG > LIST
15.4.2 Clearing the Log
To clear the log, select OK by following the procedure below.
Procedure
STATUS > LOG > DELETE
[ S T A T U S ]
|}
L O G ↲
[ L O G L I S T ] }
0 0 0 ❜ 2 3 / 0 4 / 0 1 1 2 : 3 4 : 5 6
2 0 2 3 / 0 4 / 0 1 1 2 : 3 4 : 5 6 |
0 0 0 : A L M ( F A N F R O N T O K )
➡
➡
[ L O G D E L E T E ]
□ O K ■ C A N C E L