Leader LT4670 - Copying the System Settings; Copying System Settings from a USB Memory Device to the Instrument; Copying System Settings from the Instrument to a USB Memory Device

14 SYSTEM CONFIG MENU
157
14.13 Copying the System Settings
Under SYSTEM COPY on the SYSTEM CONFIG menu, you can copy system settings.
System settings refer to the contents of the SYSTEM CONFIG menu plus instrument
information.
This feature is useful when you want to use multiple instruments with the same settings.
14.13.1 Copying System Settings from a USB Memory Device to the Instrument
To copy system settings from a USB memory device to the instrument, select ON by following
the procedure below. (Copy system settings to the USB memory device in advance by using the
COPY INT→USB menu.)
Procedure
SYSTEM CONFIG > SYSTEM COPY > COPY USB→INT
● USB Memory Device Structure
System settings are copied from the SYS folder of the USB memory device.
■ USB memory device
┗ ■ LT4670_USER
┗ ■ SYS
┗ ■ ****.json
14.13.2 Copying System Settings from the Instrument to a USB Memory Device
To copy system settings in json format from the instrument to a USB memory device, select ON
by following the procedure below.
Procedure
SYSTEM CONFIG > SYSTEM COPY > COPY INT→USB
● USB Memory Device Structure
System setting are copied to the SYS folder of the USB memory device.
The date and time of the file will be the date and time selected with TIME SOURCE on the
REFERENCE CONFIG menu.
■ USB memory device
┗ ■ LT4670_USER
┗ ■ SYS
┗ ■ ****.json
0 . S Y S T E M C O N F I G
|}

S Y S T E M C O P Y ↲
2 . S Y S C O P Y U S B → I N T
■ O K □ C A N C E L
2 . S Y S C O P Y I N T → U S B
■ O K □ C A N C E L