3 SPECIFICATIONS
24
* Audio (including packets) cannot be embedded when the check field pattern is selected.
* The frequency, level, and audio click can be set for each channel.
* The audio click and digital audio are asynchronous.
* Not available when lip sync is enabled.
* The following limitations apply for SD (525/59.94I).
• For 16 channel output, the resolution is set to 20 bits.
• Up to three groups (12 channels) can be output at 24-bit resolution.
Lip Sync Pattern
Setting SDI1, SDI2, SDI3, and SDI4 can be set separately.
(SDI3 and SDI4 are additional options.)
* AES/EBU is synchronized with SDI1.
* Not available when the check field pattern is selected.
* Safety area markers, ID characters, logo marks (future support), moving boxes, circles, and time
codes cannot be overlaid.
* The audio click of embedded audio is disabled, and audio synchronized to the lip sync pattern is
output.
User Payload (future support)
Setting On/Off
* The content of the user payload ID can be edited only with a web browser.
3.3.4 LT4670-SER03 (PTP)
Corresponding Standard
Internet Protocol Version IPv4
PTP Standard IEEE 1588 – 2008
Supported Profile SMPTE ST 2059 / AES67 / General
I/O Connectors
SFP/SPF+ connector
Number of Ports 2
Port Type SFP gauge
Compliant Standard MSA
Supported Modules and Types
SFP Transceiver RJ-45 1000Base-T
SFP + Optical Transceiver 10GBase-SR and 10GBase-SW
* The SFP/SFP+ module is optional.
To Next Page
Loading...
