3 SPECIFICATIONS
23
Component On/Off
Function Each of the Y/G, Cb/B, and Cr/R components can be
turned on and off independently.
* Not available when the check field pattern is selected.
Moving Box
Box Color White, yellow, cyan, green, blue, red, magenta, black
Speed Setting V/H LOW / MIDDLE / HIGH
Size Setting V/H SIZE 1 - 5
* Not available when the check field pattern is selected.
Circle
Display Position 90%, 80%, or 70% of the resolution
Brightness 100% / 75%
Blinking Display On/Off
On Time 1 - 9 sec (in units of 1 sec)
Off Time 1 - 9 sec (in units of 1 sec)
* Not available when the check field pattern is selected.
Time Code
Size 32 × 32, 64 × 64, 128 × 128, 256 × 256 dots
Brightness 100%, 75% (black only for the background)
Display Position Anywhere on the display
Display Position Adjustment Range
V 0 - 100% (in units of 1%)
H 0 - 100% (in units of 1%)
* Not available when the check field pattern is selected.
Image Overlay
Display Priority Test pattern < Circle < Moving box < Safety area
marker < Logo mark (future support) < ID character <
Time code (The display order cannot be changed.)
Simultaneous Display The test pattern, circle, moving box, safety area
marker, logo mark (future support), ID character, and
time code can be displayed simultaneously.
Embedded Audio
Embedded Channels Can be turned on and off at the group level.
16 channels (4 channels × 4 groups)
Sampling Frequency 48 kHz sampling (synced with the video signal)
Resolution 20 bits, 24 bits
Pre-emphasis OFF, 50/15, CCITT (only the CS bit is switched)
Frequency SILENCE, 400 Hz, 800 Hz, 1 kHz
Level -60 – 0 dBFS (in units of 1 dBFS)
Audio Click OFF, 1 sec, 2 sec, 4 sec
To Next Page
Loading...
