Leader LT4670 - Copying Presets from the Instrument to a USB Memory Device

14 SYSTEM CONFIG MENU
138
14.2.6 Copying Presets from the Instrument to a USB Memory Device
To copy presets in a dedicated format (.PRE) from the instrument to a USB memory device,
follow the procedure below. This feature is useful when you want to use multiple instruments
with the same settings. (Save the presets in the instrument in advance by using the STORE
menu.)
If there is already a preset with the same number in the USB memory device, it will be
overwritten. (It will be overwritten even if the comment is different.)
This setting appears when a USB memory device is connected.
Procedure
SYSTEM CONFIG > PRESET > COPY INT→USB
To copy a preset, follow the procedure below.
1. Select the copy source in the instrument.
Select ALL or a number from NUMBER 0 to NUMBER 9.
2. Select OK.
● USB Memory Device Structure
Presets are copied from the PSET folder of the USB memory device.
The date and time of the file will be the date and time selected with TIME SOURCE on the
REFERENCE CONFIG menu.
The "_****" portion of each file name is added if you add a comment to the preset.
■ USB memory device
┗ ■ LT4670_USER
┗ ■ PSET
┣ ■ PRESET_00_****.PRE
┃
…
┗ ■ PRESET_09_****.PRE
2 . C O P Y I N T → U S B
| A L L
3 . C O P Y I N T → U S B A L L
■ O K □ C A N C E L