16 WEB BROWSER
186
Table 16-9 | Description of SYSTEM screen
Select the backlight setting.
Turn on or off the key lock of LT4670.
Load the selected preset.
Select the number of the preset to be
loaded at the time of startup.
Save the current settings to the selected
preset number.
Add a comment to the selected preset.
The IP address of LT4670 is displayed.
The subnet mask of LT4670 is displayed.
The default gateway of LT4670 is
displayed.
Turn the HTTP function on or off.
Turn the NTP function on or off.
Set the address of the NTP server.
Set the internal date and time of the
instrument.
Turn the jam sync function on or off.
Set when to reset the time code using
the jam sync function.
Set the adjustment time to which to
insert the leap second.
Select the L-SYNC setting.
Turn the daylight saving time on or off.
Set the date and time when the daylight
saving time starts.
Set the daylight saving time offset.
Set the date and time when the daylight
saving time ends.
Select the supply voltage to the GNSS
antenna.
Set the delay correction value of the
GNSS cable.
Set the IP address of the PTP option.
Set the subnet mask of the PTP option.
Set the default gateway of the PTP
option.
Select the settings for port mirroring.
Select the alarm polarity.
Turn on or off the power supply unit
alarm.
Turn on or off the power supply unit fan
To Next Page
