3 SPECIFICATIONS
14
Control Connectors
Ethernet Port
Standard IEEE 802.3
Protocol
SNMP v2c/v3 (future support) Command control, status query, trap transmission
REST-API (future support) Command control, status query
HTTP/HTTPS (HTTPS to be supported in the future)
Monitoring and operation using a browser
NTP Internal clock synchronization, time distribution
Connector RJ-45
Type 10BASE-T, 100BASE-TX, 1000BASE-T (auto switching)
USB Port
Standard USB 2.0
Supported Media USB memory device
Supported Format FAT32
Functions Preset, logo (future support), ID character, and user
pattern (future support) loading; preset and log
saving; MIB file retrieval (future support);
authentication key retrieval (future support); firmware
update
Connector USB Type A
Remote Connector
Connector Shape D-sub 26-pin (female)
Locking Screw Inch screw (No.4-40UNC)
Number of Ports 1
Control Signal
Preset Recall LV-TTL level (low active)
Alarm Output HC-CMOS level
Input Voltage Range (Preset Recall) 0 - 5 VDC
All inputs are pulled up to +3.3 V (control is also
possible using +5 V).
Output Voltage Range (Alarm Output)
0 - 5 VDC
Functions Preset recall
Alarm output (when an error occurs, when the fan
malfunctions, or when the power supply malfunctions)
To Next Page
Loading...
