Leader LT4670 - Page 4

8.3 Setting the Time Code ...................................................................................................... 72
8.3.1 Turning Time Code Insertion On and Off....................................................................... 72
8.3.2 Setting Dropped Frames ............................................................................................. 73
8.4 Setting the Black Output ................................................................................................... 73
8.4.1 Turning the Black Output On and Off ............................................................................ 73
8.4.2 Turning BMCA Linkage On and Off (SER03) .................................................................. 74
8.5 Settings Shared by Black Outputs ....................................................................................... 74
9 AUDIO CONFIG MENU ................................................................................... 75
9.1 Setting the AES/EBU Output .............................................................................................. 75
9.1.1 Selecting the Frequency ............................................................................................. 75
9.1.2 Setting the Level ....................................................................................................... 75
9.1.3 Setting Clicks ............................................................................................................ 76
9.1.4 Settings Shared by Channels ....................................................................................... 76
9.1.5 Selecting the Resolution ............................................................................................. 76
9.1.6 Selecting the Pre-emphasis Mode ................................................................................ 77
9.1.7 Turning Time Code Insertion On and Off....................................................................... 77
9.1.8 Adjusting the Timing .................................................................................................. 77
9.1.9 Turning Lip Sync Interlock On and Off (SER02) ............................................................. 78
9.2 Setting the Silence Output ................................................................................................. 78
9.2.1 Settings Shared with the AES/EBU Output .................................................................... 78
9.2.2 Selecting the Resolution ............................................................................................. 79
9.2.3 Adjusting the Timing .................................................................................................. 79
9.3 Setting the Word-clock Output ........................................................................................... 80
9.3.1 Adjusting the Timing .................................................................................................. 80
10 LTC CONFIG MENU ....................................................................................... 81
10.1 Turning the LTC Output On and Off ..................................................................................... 81
10.2 Selecting the LTC Format .................................................................................................. 81
10.3 Adjusting the Timing (Frame) ............................................................................................ 82
10.4 Adjusting the Timing (Bit) ................................................................................................. 82
10.5 Adjusting the Offset .......................................................................................................... 82
10.6 Setting Dropped Frames.................................................................................................... 83
10.7 Settings Shared by LTC Outputs ......................................................................................... 83
11 CW/1PPS CONFIG MENU ............................................................................... 84
11.1 Switching the Output Signal............................................................................................... 84
12 SDI CONFIG MENU (SER02) .......................................................................... 85
12.1 Selecting the Frequency Group .......................................................................................... 85
12.2 Setting the SDI Format ..................................................................................................... 86
12.2.1 Selecting the System ................................................................................................. 86
12.2.2 Selecting the Color System ......................................................................................... 87
12.2.3 Selecting the Frame Frequency ................................................................................... 87
12.3 Configuring Timing Data ................................................................................................... 88