3 SPECIFICATIONS
29
Time Code
Size 32 × 32, 64 × 64, 128 × 128, 256 × 256 dots
Brightness 100%, 75% (black only for the background)
Display Position Anywhere on the display
Display Position Adjustment Range
V 0 - 100% (in units of 1%)
H 0 - 100% (in units of 1%)
* Not available when the check field pattern is selected.
Image Overlay
Display Priority Test pattern < Circle < Moving box < Safety area
marker < Logo mark (future support) < ID character <
Time code (The display order cannot be changed.)
Simultaneous Display The test pattern, circle, moving box, safety area
marker, logo mark (future support), ID character, and
time code can be displayed simultaneously.
Embedded Audio
Embedded Channels Can be turned on and off at the group level.
16 channels (4 channels × 4 groups)
Sampling Frequency 48 kHz sampling (synced with the video signal)
Resolution 20 bits, 24 bits
Pre-emphasis OFF, 50/15, CCITT (only the CS bit is switched)
Frequency SILENCE, 400 Hz, 800 Hz, 1 kHz
Level -60 – 0 dBFS (in units of 1 dBFS)
Audio Click OFF, 1 sec, 2 sec, 4 sec
* Audio (including packets) cannot be embedded when the check field pattern is selected.
* The frequency, level, and audio click can be set for each channel.
* The audio click and digital audio are asynchronous.
* Not available when lip sync is enabled.
Lip Sync Pattern
Setting On/Off
* Synchronized with AES/EBU.
* Not available when the check field pattern is selected.
* Safety area markers, ID characters, logo marks, moving boxes, circles, and time codes cannot be
overlaid.
* The audio click of embedded audio is disabled, and audio synchronized to the lip sync pattern is
output.
User Payload ID (future support)
Setting On/Off
* The content of the user payload ID can be edited only with a web browser.
To Next Page
