Leader LT4670 - Page 44

4 PANEL DESCRIPTION
31
4 GENLOCK/CW
Lights in green when the reference signal is locked in GENLOCK or CW.
Flashes in orange until locked, lights in orange during stay in sync.
[See also] "6.2.2 Genlock Mode" "6.2.3 CW Mode"
5 GNSS (SER01)
Lights in green when the reference signal is locked in GNSS.
Flashes in orange until locked, lights in orange during stay in sync.
[See also] "6.2.4 GNSS mode (SER01)"
6 PTP IN (SER03)
Lights in green when the reference signal is locked in PTP.
Flashes in orange until locked, lights in orange during stay in sync.
[See also] "6.2.5 PTP mode (SER03)"
7 INT
Lights in green when the reference signal is INTERNAL.
[See also] "6.2.1 Internal Mode"
8 TIME
Lights in green when the time is successfully acquired from the selected TIME SOURCE.
Lights in orange when the time has not been obtained or when the TIME SOURCE has been
changed.
9 PTP OUT
Lights in green when the PTP output is operating normally.
[See also] "6.3.5 PTP Signal Output (SER03)"
10 STAY
Lights in orange when in stay-in-sync mode.
[See also] "6.2 Signal Input (Genlock Operation)"
11 ALARM
Lights in red when an alarm occurs.
[See also] "6.5 Alarm Display"
12 KEYLOCK
Lights in green when the key lock is enabled.
[See also] "6.1.2 Enabling the Key Lock"
13 CONFIG
The CONFIG menu is displayed.
Switches the top menu or returns to the higher level menu. It also cancels the settings.
[See also] "6.1.3 Menu Operations"