97
The supplied measuring cup can be used
to measure and dose the spray agent.
For measuring and dosing the spray
agent: Place the measuring cup (4) in
the holder (5).
Swivel the cover (6) upwards to open it.
When the canister flushing nozzle (7) is
required:Swivel the canister flushing
nozzle upwards.
When the canister flushing nozzle is not
required:Secure the canister flushing
nozzle with the measuring cup (8) or
another container.
Switch on pump via PTO shaft.
Operate the pump at the rated speed.
Switch the diverting valve to the induc-
tion lock.
If necessary, regulate the performance
of the agitator regulation.
Open the valve for edge moistening and
fill approx. 10 l of the contents from the
main tank into the induction lock.
To Next Page
Loading...
