99
6.4.3 Conversion of device
The conversion work must be carried out
by qualified service personnel.
Observe the national regulations when ret-
rofitting.
Here, the following options apply:
Allow the height of the towing eye im-
plement to be adjusted by re-screwing.
Have other traction loops approved by
LEMKEN installed, see «Traction loops,
page 226».
In line with national provisions:
Have the towing device and/or drawbar
components replaced in the registration
papers.
6.4.4 Devices with air brake systems
Connect the brake couplings (1) of the
device to the tractor.
With a manual brake force regulator:
Set manual control to the required posi-
tion.
Press the red button (2) on the double
release valve to release the parking bra-
ke of the implement.
To Next Page
Loading...
