LEMKEN Primus-12 - Working with Drop Hoses; Attaching Drop Hoses

Operation
149
 Install edge nozzles on the outermost
nozzle holders.
 Test spray with water to see whether the
desired spray pattern is achieved.
 If the desired spray pattern is not achie-
ved:
 Reposition the edge nozzles.
 Use other edge nozzles.
 Change the driving route.
7.16 Working with drop hoses
7.16.1 Attaching drop hoses
 Completely fold out boom.
 Secure the boom against unintentional
lowering.
 Rotate nozzle holder to an open positi-
on.
 For booms with multiple nozzle holders
(4) in which all nozzle holder positions
are fitted with nozzles, remove one bay-
onet cap with nozzle (5) for each.
5
4