189
For dismantling and mounting heavy com-
ponents:
Use hoisting gear.
To avoid slipping of tools:
Use aids to reduce the amount of force
required, e.g. extensions.
Check nuts and screw heads etc. for
wear and tear. Consult a specialist if ne-
cessary.
10.3 Environmental protection
Ensure that all materials and operating supplies used to
maintain and care for the device are disposed of in line with
environmental regulations.
All recyclable components should be recycled.
Observe the national regulations applicable in your country.
10.4 Maintenance intervals
After the first 2 operating hours
After 3 years – before official im-
plement inspection
Piston rods hydraulic ram
To Next Page
Loading...
