LEMKEN Primus-12 - Work for a Qualified, Authorised Person; Axle; Traction Loop and Hitch Ball Coupling

Maintenance and repairs
216
10.16 Work for a qualified, authorised person
ATTENTION: Have the following work car-
ried out by a specialist workshop or by
trained and instructed members of staff.
10.16.1 Axle
 Have the following work carried out befo-
re the start of the season:
 Check the brake pads
 Check the braking system
 Check the free movement of the tape-
red roller bearing
 Test the bearing
 Replace the lubricating grease
 Inspection
10.16.2 Traction loop and hitch ball coupling
 Have the following work carried out an-
nually:
 Check for wear and, if necessary, re-
place the traction loop and/or the hitch
ball coupling