LEMKEN Primus-12 - Emptying the Clean Water Tank; Filling the Main Tank

Operation
117
7.3.2 Emptying the clean water tank
 To ensure no vacuum when emptying
the clear-water tank:
Before emptying check whether the ven-
tilation valves (2) are functional.
 Unscrew and remove the union nut (4) of
the connecting hose.
The water runs out of the clear water
tanks.
 After emptying: Place the union nut of
the connecting hose on the switching va-
lve and close it.
7.4 Filling the main tank
The main tank can be filled with water and
spraying agent.
Depending on the filling agent, the following feed options are provided:
Feed
Filling agent
External filling connection
Water and ready-mixed spraying fluid
Intake connection
Water and ready-mixed spraying fluid
Chemical inductor
Unmixed or ready-mixed spraying fluid
4