LEMKEN Primus-12 - Stir Spraying Fluid before Distribution

Operation
159
 To open the control valve (2):Press and
hold softkey for 4 seconds.
7.18.2 Stir spraying fluid before distribution
Target: To keep the piping system and
nozzles functioning and prevent blockage
due to decomposed spray solution.
Application: Distribution continued after
an interruption.
Prerequisite: To ensure the correct con-
centration of the spraying fluid, do not
spray while stirring.
Description 2500/3500 l*
* Position designations correspond to the position designations of the fluid lines.
H
5
2
G
D
F
C
A
21
3
9
7
5