163
The following should be noted during the
cleaning:
Regulations of the spraying agent manu-
facturer
Regulations of the nozzle manufacturer
These operating instructions
Other regulations for handling spraying
agents
Standard procedure:
Emptying main container, see
"Emptying the main tank, page 163".
Cleaning the internal system, see
"Internal cleaning, page 166".
Distribute fluid when cleaning the inside.
For intensive cleaning: Perform internal
cleaning at least 3x.
Empty the clean water tank, see
"Emptying the clean water tank, page
117".
Clean filter, see "Cleaning the filter,
page 177".
Clean external device, see "
External cleaning, page 174".
8.2 Emptying the main tank
8.2.1 General
If the content of the main tank cannot be properly sprayed, the spraying agent is
to be disposed of in the proper manner.
To empty the main tank
To Next Page
Loading...
