LEMKEN Primus-12 - Wheel Nuts

Maintenance and repairs
208
Diameter
[Nm]
M 12
39
M 14
62
M 16
95
M 18
130
M 20
184
M 22
250
M 24
315
M 27
470
10.11.4 Wheel nuts
The tightening torque for the wheel nuts (1)
with centring locking bar (2) is 510 Nm.
 Remove the protecting caps (3).
 Check the tightening torque of the wheel
nuts (1):
 After the first 8 operating hours
 After the first ride under load
 Every 50 operating hours
 Tighten the wheel nuts diagonally with a
torque wrench, if necessary.
 Install the protecting caps.
 Replace damaged or non-existent pro-
tecting caps.
1
2
3