LEMKEN Primus-12 - Detaching the Implement

Detaching the implement
184
9.3 Detaching the implement
 Uncouple the brake lines from the trac-
tor.
 Attach the brake line to the holder on the
implement side.
 Uncouple the cardan shaft from the trac-
tor.
 Attach the cardan shaft to the holder on
the device side.
 Disconnect the electrical lines from the
tractor.
 Attach the electric lines to the holders on
the device side.
 Uncouple the hydraulic supply pipes
from the tractor.
 Attach the hydraulic lines to the holder
(1) on the device side.
 Uncouple the implement from the tractor.
1