LEMKEN Primus-12 - Skids and Pivoted Guide

Maintenance and repairs
195
 Lubricate the four sliding surfaces of the
lift mast (2).
To lubricate these sliding surfaces, use
chain and adhesive lubricant OKS Mox-
Active 451.
10.6.7 Skids and pivoted guide
Lubrication interval:
 Every 8 operating hours
 Lubricate the grease nipple on the self-
aligning bearing (1).
 Lubricate the two left and right grease
nipples of the pivoted guide (2).
 Lubricate the four left (3) and four right
grease nipples (4) on the skids.
2
3
4
2
1