124
Pull filling hose out of the external water
source.
Or
remove the filling hose from the external
water connection.
Remove the filling hose from the intake
connection.
Close the intake connection with the
blind cap.
7.4.4 Chemical inductor
Application: Rinse unmixed or ready-
mixed spraying fluid into the main tank.
Precondition: The main tank is filled with
water or fertilizer solution according to the
instructions of the respective spray agent
manufacturer.
Fold the lever (1) on the induction lock
upwards.
Swivel the induction valve downwards
into the working position.
To Next Page