228
The pulling tractor must ensure sufficient braking deceleration for the implement
and the pulling tractor.
Ensure the tractor always achieves the prescribed braking deceleration with the
implement.
11.6.2 Permitted transport speed
The following table shows the permitted transport speeds depending on the
equipment of the implement.
Depending on the capacity of the wheels, the maximum permitted speed can be
25 or 40 km/h.
Maximum permitted transport speed
11.6.3 Axle load
Primus 2500/3500:
Maximum permissible axle load [kg]:
Maximum permissible axle load with tyres 270/95 R48 145 A8 [kg]:
Primus 4500:
Maximum permissible axle load [kg]:
The braking system of the implement is adapted to the delivery
condition of the implement.
Modifications to the implement outside the listed areas are not
permitted.
To Next Page