LEMKEN Primus-12 - Handover of the Implement

Handover of the implement
41
4 HANDOVER OF THE IMPLEMENT
The following components are delivered with your implement:
 Implement ID card
 Operating instructions
 Spare parts lists
 Measuring jug
 Two wedges
 Drive shaft
 Operating terminal(s)
 Cable for power supply to the operating terminal
 Cable for the lighting system
 Ensure that the implement corresponds to the scope of your order immediately
the implement is delivered.
 Inform your dealer of any faults without delay.
 Also check the type and completeness of any accessories which are also supp-
lied.
On handover you will receive an induction from your dealer on handover.
 Familiarise yourself with the implement and its functions immediately after the
handover.