LEMKEN Primus-12 - Special Safety Information

Safety measures and precautions
26
Label with marked parameters of the implement for the recurring inspection of se-
cond-hand implements.
Figure: Label for the inspection of second-hand implements - example
1
Nominal volume of the main tank
6
Nominal speed and direction of rota-
2
Tare weight upon delivery
tion of PTO shaft on the implement
3
Design of the pump
7
Pulses of the
4
Output of the pump
flowmeter per l
5
Maximum operating pressure
8
Pulses of the
of the spray hydraulics
speed sensor per 100 m
3.4 Special safety information
WARNING
Risk of injury due to non-compliance with applicable occupa-
tional safety guidelines
If the applicable occupational safety guidelines are not complied
with when handling the implement or if safety devices are ren-
dered unusable, there is a risk of injury.
 The user must personally supervise all work on and with the
implement.
 The user instructs his/her personnel in occupational safety in
accordance with the applicable occupational safety guidelines.
5
4
3
2
1
6
7
8