Depending on the equipment, the connec-
ting fixture can be unscrewed and installed
higher to adapt to the implement on the
tractor. When doing so, only permissible
traction loops may be used.
The drawbar extension is provided to
enlarge the clearance between the tractor
and the implement.
To prevent damage to the implement or
the tractor, a drawbar extension is required
for the following booms: B 30/FS 24 to
B 30/FS 30.
When using other booms, if there is a risk
of damage to the implement or to the trac-
tor, then a drawbar extension is also requi-
red for these booms.
To Next Page
Loading...
