110
6.8.2 Calibrate the speed sensor.
The speed sensor is calibrated with the
controller of the device.
The operating instructions in the "SPRAY-
ER-Controller MIDI" manual describe how
to calibrate the speed sensor in chapter
"7.6 Selecting and configuring the speed
sensor".
6.9 Check compatibility of pesticides with equipment
Specially approved pesticides and mixed -
compounds may have an adverse effect on
the device materials. This applies in partic-
ular to spraying agents containing solvents
and mixed compounds.
The following parts of the device may be
affected by damage:
Hoses
Spray lines
Seals
Containers
Pump membranes
Nozzle valve membrane