LEMKEN Primus-12 - Chemical Inductor; Drive Shaft; Protective Tube

Maintenance and repairs
201
10.6.11 Chemical inductor
Lubrication interval:
 Every 8 operating hours
 Lubricate the 4 grease nipples on the
holder (1).
10.7 Drive shaft
 Use lithium-lubricated grease, consistency class NL-G12.
The drive shaft must be serviced on the tractor side and the implement side.
1
Protective tube
2
Safety chain
3
Sliding tube not illustrated (inside the
protective tube)
4
Joints
10.7.1 Protective tube
The protective tubes of the drive shaft must be checked for damage and wear.
 Replace damaged protective tubes.
1
1
4
2