LEMKEN Primus-12 - Operation; Prepare Device for Use; Adapt Device for Use

Operation
112
7 OPERATION
7.1 Prepare device for use
7.1.1 Adapt device for use
Target: The external conditions and
equipment of the device are appropriate for
the intended use.
Check the following before distribution and
adjust if necessary:
 Check whether the unit contains anti-
freeze.
If the unit contains antifreeze: Drain anti-
freeze before distribution, see page 114.
 Check weather conditions.
If frosty:Prepare the device for operation
in frosty conditions, see page 113.
 Check whether the nozzles fit the plan-
ned usage.
Where applicable, change nozzles.
 Check whether drop hoses can be used
for fertilisers.
Where applicable, attach drop hoses.
 Adapt adjustments of the electronic con-
trol, see operating manual for SPRAYER
controller MIDI.