132
If it is not possible to return empty and cleaned canisters:
Recycle the empty and cleaned spray agent canisters.
7.7 Cleaning gun at the chemical inductor
Observe the applicable standards and regulations for cleaning
the implement.
The cleaning gun may only be operated with clean water.
Switch the selection valve to clean water
tank.
Switch on the pump.
Operate the pump at approx. 400 rpm.
For a maximum cleaning effect of the
cleaning gun, edge moistening, agitator
nozzle and cleaning nozzle must be swit-
ched off.
Close the rocker arm for edge moisten-
ing by switching it downwards to OFF.
Close the rocker arm for the agitator
nozzle by switching it downwards to
OFF.
Close the rocker arm for the canister
rinsing nozzle by switching it downwards
to OFF.
To Next Page
Loading...
