131
After cleaning the spray agent canister:
Close the rocker arm of the cleaning
nozzle.
If necessary, clean further empty spray
agent canisters.
If necessary, rinse the chemical inductor.
Drain the chemical inductor empty.
Close the suction valve.
Put the measuring cup back on the
cleaning nozzle.
Fold the cleaning nozzle (1) downwards.
Close the cover.
Switch the selection valve to main tank.
Switch the diverting valve to spraying.
In order to use the clean water of the clean water tank as effectively
as possible, we recommend sucking in the clean water with a filling
hose via the filling connection of the selection valve for canister
cleaning and system cleaning of the chemical inductor.
It may be possible to return empty and cleaned canisters to your spray agent
supplier.
Ask your spray agent supplier.
To Next Page
Loading...
