LEMKEN Primus-12 - Attaching the Implement; Attaching the Implement with Drawbar Eye

Preparations
95
6.4 Attaching the implement
Aim: Device is fully available for distribu-
tion.
Application: Before use
ATTENTION: To protect the tractor and
device, the latter is suspended in a hori-
zontal position at a vertical angle of +/-5°
to the tractor.
6.4.1 Attaching the implement with drawbar eye
 Slowly and carefully, pull the tractor's
trailer coupling up to approx. 10 cm a-
way from the towing eye of the imple-
ment.
 Secure the tractor against rolling over.
 Switch the hydraulic system to depres-
surised.
 Connect hydraulic hoses (3) to tractor.
o Make certain they are assigned
correctly.
o Note the hydraulic system la-
bels.
 Connect the electrical lines to the tractor.
 Test the lighting equipment.
 Align the implement horizontally.
 As required:
Adjust the height of the tractor trailer
3