96
coupling.
If the trailer coupling on the tractor can-
not be adjusted to allow horizontal sus-
pension of the device, the device can be
converted. See «
Conversion of device, page 99».
Slowly and carefully, pull the tractor's
trailer coupling up to the towing eye of
the implement.
ATTENTION: Do not slide the device in
the process. If the device is on the sup-
port legs, moving the device may dama-
ge them.
Secure the tractor against rolling over.
Uncouple the device.
When coupling, ensure the towing eye of
the implement is locked in place with the
trailer coupling of the tractor.
Shorten the supporting leg (1) using the
crank (2).
Release and dismantle pins (3).
Dismantle (1) supporting leg.
Place supporting leg (1) in the park posi-
tion.
Insert pin (3) in the safety borehole (4)
and secure it.
To Next Page
Loading...
