LEMKEN Primus-12 - Appendix; General Information about Nozzles; Nozzle Field of Application

Appendix
244
12 APPENDIX
12.1 General information about nozzles
Each nozzle type has a different volume flow, spray pattern, drop size and nozzle
characteristics. The liquid to be sprayed, the environmental conditions, the nozzle
characteristics and official regulations such as distance conditions, drift reduction
classes etc. must be taken into account for the selection of the nozzles.
The volume flow of a nozzle changes with the spraying pressure. If the volume
flow of a nozzle (l/min) is doubled, four times the spraying pressure (bar) is requi-
red.
12.2 Nozzle field of application
Designation
Material (1)
Spray
angle
Spray height
above
target area
(cm)
Optimum
spray height
(cm)
Size (2)
Pressure
range
(bar)
Optimum
spray pres-
sure (bar)
Standard flat jet nozzles
LECHLER LU
POM/Cer.
120º
40 - 60
50
.01 - .08
1,5 - 5
1,5 - 2,5
TEEJET XRC
VP
110°
40 - 60
50
.025 - .20
1 - 4
1,5 - 2,5
TEEJET XRC
VS
110°
40 - 60
50
.025 - .05
1 - 4
1,5 - 2,5
TEEJET XRC
VK
110°
40 - 60
50
.02 - .08
1 - 4
1,5 - 2,5
TEEJET XR
VP/VS/VK
110°
40 - 60
50
.02 - .08
1 - 4
1,5 - 2,5
AGROTOP TipCap TCP
POM
110°
40 - 60
50
.02 - .20
1 - 4
1,5 - 4
AGROTOP TipCap TCC
Cer.
110°
40 - 60
50
.015 - .08
1,5 - 4
1,5 - 4
Air injector-nozzles
LECHLER ID
POM
120º
40 - 60
50
.01 - .08
3 - 8*
4 - 6
LECHLER ID
C
120º
40 - 60
50
.01 -. 06
3 - 8*
4 - 6
LECHLER IDN
POM
120º
40 - 60
50
.025 - .03
2 - 8
4 - 6
LECHLER IDK
POM
120º
40 - 60
50
.01 - .05
1,5 - 6**
1,5 - 3
LECHLER IDK
C
120º
40 - 60
50
.01 -. 05
1,5 - 6**
1,5 - 3
LECHLER IDKN
POM
120°
40 - 60
50
.03 - .04
1 - 6
2 - 4
TEEJET AIC
VP
110°
40 - 90
50
.02 - .05
2 - 8
4 - 6
TEEJET AIC
VK
110°
40 - 90
50
.025 - .05
2 - 8
4 - 6
TEEJET AIC
VS
110°
40 - 90
50
.015 - .10
2 - 8
4 - 6
TEEJET AI
VS
110°
40 - 90
50
.015 - .08
2 - 8
4 - 6
TEEJET TTI
VP
110°
40 - 90
50
.015 - .06
1 - 7
4 - 6
AGROTOP AIRMIX
POM
110°
40 - 90
50
.01 - .06
1 - 6
2 - 4
AGROTOP Albuz AVI
Cer.
110°
40 - 90
50
.015 - .10
3 - 7
3 - 7
AGROTOP AirMIX OC
POM
80°
(15°+65°)
(4)
(4)
.02 - .05
1 - 6
2 - 4
Dual flat jet nozzles (3)
LECHLER DF
V2A
120º
40 - 60
50
.02 -. 06
2 - 5
2 - 3
LECHLER IDKT
POM
120°
40 - 60
50
.03 - .05
1,5 - 6**
1,5 - 3
TEEJET TTJ 60
VP
110°
40 - 60
50
.02 - .06
1 - 6
2,0 - 3,5
AGROTOP Albuz AVI TWIN
Cer.
110°
40 - 60
50
.01 -. 05
2 - 8
4 - 7