238
11.13.1 Device system
Required pressure in the tractor hydraulics for the hydraulic
ram on the device side [bar]:
The hydraulic system is filled with hydraulic oil HLP 46 in accordance with ISO VG
46; DIN 51 524 T.2.
11.13.2 Volumetric flow and pressure
Height adjustment of the boom up to B30 (P1)
Electro-hydraulic operation up to B30 (P6T6) without steering
The information for electro-hydraulic operation also applies to devices equipped
with load sensing.
11.13.3 Pressure limit valves
The pressure limit valves are factory set to 150 bar and may not be adjusted.
11.14 Electronic pressure display
electronic pressure sensor in the pipe cross-section of the
boom