LEMKEN Primus-12 - Braking System; Without Braking System

Layout and description
44
Depending on the braking system, the maximum permissible speed of the imple-
ment can be:
 25 km/h
 40 km/h
Always pay attention to national regulations.
The implement has an adjusting axle with adjustment increments of 50 mm for ad-
justing various axle flange dimensions.
A different track width can also be achieved, for example, through a wheel con-
version.
Adjustment of the axle to another track should only be carried out
by service personnel.
5.4 Braking system
The implement may be equipped:
 without braking system
 with a compressed air brake with manual brake force regulator
 with a hydraulic braking system
5.4.1 Without braking system
For implements without a braking system,
running axles or braking axles without ac-
tuating devices are used.