LEMKEN Primus-12 - Page 136

Operation
134
The cleaning effect of the cleaning gun can
be infinitely varied with the rocker arm (1).
 Press the handle (2) to activate the
cleaning gun (3).
After releasing the handle (2), the spraying
process is interrupted immediately.
For permanent operation of the cleaning
gun:
 Press the handle (2) together.
 Push in the ram (4).
 Release the handle (2).
The cleaning gun is now in permanent
operation.
When the handle (2) is pressed again, the
ram (4) is released from the fixing and the
cleaning gun is deactivated.
 Clean empty canisters or the chemical
inductor tank.
After cleaning:
 Close the rocker arm for the cleaning
gun by switching it downwards to OFF.
 Insert the cleaning gun into the holder
(2).
Due to the limited content of the clean water tank, we recommend
 for cleaning empty spray agent canisters
 and for rinsing the chemical inductor with clean water:
 Suck in clean water with a filling hose via the selection valve,
see «Filling the main tank, page 117».
1
2
4
3