LEMKEN Primus-12 - Page 148

Operation
146
 At the end of the spray lane, switch off
the nozzles and turn them around.
 Continue distribution in the next row.
 If the edge of the cultivated area runs
diagonal to the cultivated area, turn off
outer nozzles or sections.
 When the machine drifts outside the de-
signated track, for example on a side
slope: Go into reverse with the tractor.
 When pressure fluctuations occur when
the main tank becomes empty:
 Interrupt output.
 Refill device.
or
 Rinse the pipe system with clear water
and finish applying.
 If distribution is interrupted:
 Rinse the piping system with clear wa-
ter, see "Stir spraying fluid before dis-
tribution, page 159".
 Stir the spray liquid before re-applying,
see "Flush the pipe system before in-
terruption, page 156".
 Rinse the piping system with clean water
before a longer spraying break or after
the last application of the day.
 Finish application.