Correct pressure in the pressure accu-
mulator
Approx. 4 bar with a spraying pressure
of 1 – 10 bar
Approx. 6 bar with a spraying pressure
of 5 – 15 bar
Remove the cap (2).
Check pressure with a filling unit inclu-
ding a tyre inflation device.
If there is insufficient pressure at the ac-
cumulator (1), fill the accumulator with a
filling device including a tyre inflation va-
lve to the specified pressure.
Alternative
Fill the pressure accumulator (1) to ap-
prox. 10 bar.
Operate the pump at the specified
speed.
Observe the pressure hoses of the pump.
To Next Page
Loading...
