Lexmark MS711 - Page 250

Error code Description Action
959.03 Signature Verification Code failed to authenticate a
code partition
Go to “Controller board removal” on page 492.
959.04 Jump to unverified address
Upgrade firmware. If that fails, replace the controller
board.
Go to “Controller board removal” on page 492.
959.05 Unknown Boot Failure
Upgrade firmware. If that fails, replace the controller
board.
Go to “Controller board removal” on page 492.
959.20 Smart chip hardware failure
Replace the controller board.
Go to “Controller board removal” on page 492.
959.21 Smart chip did not respond to command request
Replace the controller board.
Go to “Controller board removal” on page 492.
959.22 Challenge Secret Failure
Replace the controller board.
Go to “Controller board removal” on page 492.
959.23 Smart chip self test failed during initialization
Replace the controller board.
Go to “Controller board removal” on page 492.
959.24 EEPROM Retention Error (Write failure)
Replace the controller board.
Go to “Controller board removal” on page 492.
959.25 Insufficient device space during HW prog
Replace the controller board.
Go to “Controller board removal” on page 492.
959.26 Incremental counter reset exceeds maximum value
Replace the controller board.
Go to “Controller board removal” on page 492.
959.27 Increment count failed due to maximum value limit
Replace the controller board.
Go to “Controller board removal” on page 492.
959.28 Invalid SP Memory Configuration
Replace the controller board.
Go to “Controller board removal” on page 492.
959.30 Smart chip library flagged an invalid argument(s)
Replace the controller board.
Go to “Controller board removal” on page 492.
959.31 Smart chip library flagged an invalid device address
Replace the controller board.
Go to “Controller board removal” on page 492.
959.32 Failure to initialize physical interface
Replace the controller board.
Go to “Controller board removal” on page 492.
959.33 Unknown/unexpected Error
Replace the controller board.
Go to “Controller board removal” on page 492.
959.34 System smart chip Bus Busy Error
Replace the controller board.
Go to “Controller board removal” on page 492.
959.35 Transmission Error
Replace the controller board.
Go to “Controller board removal” on page 492.
4063
Diagnostic information
250