FLIR Client 12 for PC / Mac
13
1. Click Remote Setting in the top-right corner of the window.
2. Under Settings, click Network, then click the Email Schedule tab.
3. Use the dropdown next to Channel to select a channel to set the email schedule for.
4. Use the dropdown next to Week to select the day of the week you would like to set the
schedule for.
5. The times of day during which email notifications for motion events are enabled are
represented by yellow bars, and system warnings by red. Click-and-drag to enable or
disable email notifications during a certain time of day.
NOTE
Repeat steps 4 & 5 for as many days of the week as you would like to configure the schedule for.
6. If needed, use the Copy functions to copy the schedule for one day to other days of
the week, or to copy one channel’s entire schedule to other channels.
7. Click Save.
13.6.14 Configuring DDNS Settings
The primary connectivity option uses FLIR Cloud Services to connect to your system over
the Internet without requiring port forwarding or DDNS registration. Lorex DDNS is also
available as an optional connectivity option.
Prerequisites:
• You must create a free Lorex DDNS account. See 19 DDNS Setup (Advanced), page
140 for full instructions.
To configure DDNS settings:
#LX400086; r. 1.0/39246/39246; en-US
109
To Next Page
Loading...
Need help?
General