Microsemi IGLOO2 - Revision 10.0; Revision 9.0; Revision 8.0; Revision 7.0

Revision History
AC393 Application Note Revision 14.0 2
1.5 Revision 10.0
The following is a summary of the changes made in revision 10.0 of this document.
• Updated Power Supplies, page 4 (SAR 77745 and SAR 79670).
• Updated Table 6, page 15 (SAR 78887).
• Updated SPI Master Programming, page 24 (SAR 75910).
• Updated SerDes, page 26 (SAR 78504).
• Updated User I/O and Clock Pins, page 34 (SAR 61314).
1.6 Revision 9.0
The following is a summary of the changes made in revision 9.0 of this document.
• Updated Figure 1, page 5 (SAR 72533).
• Added CCC_PLL_VDDA and MSS_xDDR_PLL_VDDA details under Power Supplies, page 4 (SAR
72533).
• Deleted the RC Values for Filter Circuitry table (SAR 72533).
• Added the M2S060T/M2GL060T device column in Table 9, page 17 (SAR 70484).
1.7 Revision 8.0
The following is a summary of the changes made in revision 8.0 of this document.
• Updated Figure 1, page 5 (SAR 66682).
• Updated the RC Values for Filter Circuitry table (SAR 66682 and SAR 65367).
• Updated Table 6, page 15 (SAR 70545).
• Updated Table 9, page 17 (SAR 67599).
• Updated Table 17, page 29 to replace pin SC_SPI_SS with SC_SPI_SDO.
• Updated PLL Filter, page 28 (SAR 60798).
• Updated Figure 17, page 31 (SAR 65438, SAR 69743 and SAR 69580).
• Updated Figure 18, page 32 (SAR 65438).
• Updated Figure 20, page 33 (SAR 65438).
• Added Figure 21, page 34 (SAR 64377).
1.8 Revision 7.0
The following is a summary of the changes made in revision 7.0 of this document.
• Updated Figure 1, page 5 and Figure 4, page 14 (SAR 62858).
• Updated Power Supply Sequencing, page 9 (SAR 64117).
• Updated Power Supply Flow, page 12.
• Added Ta ble 9, page 17.
• Updated Table 6, page 15, Table 20, page 36, and Table 13, page 19 (SAR 62858).
• Updated Reset Circuit, page 21.
• Updated AC Coupling, page 27.
• Updated Figure 17, page 31, Figure 18, page 32, Figure 19, page 33, and Figure 20, page 33 (SAR
65438).
• Replaced all instances of VQ144 with TQ144 Package.
• Removed all instances of and references to M2S100 and M2GL100 device (SAR 62858).
1.9 Revision 6.0
The following is a summary of the changes made in revision 6.0 of this document.
• Updated Design Considerations, page 4 (SAR 58055).
• Updated Power Supplies, page 4 and Figure 1, page 5 (SAR 52580).
• Updated Power Supply Sequencing, page 9 (SAR 59593 and SAR 57004).
• Updated Figure 4, page 14 (SAR 52580).
• Added M2S090T/M2GL090T-FCS325 information for power supplies in Table 6, page 15 (SAR
58241).
• Updated Figure 2, page 7 (SAR 56291).
• Added a foot note to Table 17, page 29 (SAR 59563).