To Ensure Safe Use
12
l
Caution regarding moving parts
• Keep parts of the body such as the face and hands away from moving parts. Also keep clothing
(e.g., loose clothing and accessories) that may impede work away from the machine. Failure to
do so may result in injury.
• Long hair should be tied back. Failure to do so may result in injury.
l
Do not disassemble or repair
• Do not attempt to disassemble or repair this machine. Otherwise there is a risk of failure, electric
shock, or fire.
l
Handling the cutter
• Avoid touching the cutter blade. Failure to do so may result in injury.
• Do not shake or swing the cutter holder. Doing so may cause the blade to come off.
l
Heater
• The heater becomes extremely hot. Do not touch with bare hands.
• Condensation may form on the print head nozzle surface depending on the ambient
temperature and humidity. The formation of condensation may cause ejection failures (e.g.,
nozzle clogging or deflection). Perform head cleaning if any ejection failures (e.g., nozzle
clogging or deflection) occur during printing. "Head Cleaning"(P. 81)
Set the platen heater to a temperature not exceeding 35 °C, and ensure that the ambient
temperature is within the permissible operating temperature range (20 to 30 °C). "Installation
Precautions"(P. 17)
l
Other usage precautions
• Keep children away from this machine.
• Do not pull the media when the clamp lever is lowered (the media is clamped). Doing so may
damage the machine.
To Next Page
Loading...
Need help?
General
