MIMAKI JV330 Series User Manual

Ink or any Other Liquid Used with the Machine
15
• Printing is disabled if a different ink IC chip is used.
• Do not store ink, maintenance liquid, or other liquids used with the machine in locations
exposed to direct sunlight.
• Do not store ink, maintenance liquid, or other liquids used with the machine in environments
where cutting fluid or other volatile substances (such as amines or modified amine alcohol) are
present in significant quantities. Storage in such places increases the risk of failure or ejection
failures (e.g., nozzle clogging or deflection).
Ink Specifications
Item JV330 Series, CJV330 Series TS330-1600
Type Special solvent ink (Mimaki Engineering
product)
Special sublimation transfer ink (Mimaki
Engineering product)
Color
*1
Cyan (C)
Magenta (M)
Yellow (Y)
Black (K)
Light cyan (Lc)
Light magenta (Lm)
Light black (Lk)
Orange (Or)
White (W)
Blue (BL)
Magenta (M)
Yellow (Y)
Black (K)
Light blue (Lbl)
Light magenta (Lm)
Light black (Lk)
Fluorescent pink (FP)
Fluorescent yellow (FY)
Form Aluminum pack Aluminum pack (2,000 ml) / ink tank
(10,000 ml)
Ink capacity
*1
2,000 ml, 1,000 ml, 500 ml 2,000 ml, 10,000 ml
Expiration date As indicated on the ink pack. However,
within three months after opening, even
before the expiration date
As indicated on the ink pack. However,
within one month after opening, even
before the expiration date
Storage
temper
ature
When
stored
10 to 35 °C (daily mean temperature)
• However, not more than 1 month at 30
°C
• Ink quality may deteriorate if stored
outside these conditions.
10 to 35 °C (daily mean temperature)
• Ink quality may deteriorate if stored
outside these conditions.
During
transpo
rtation
1 to 40°C
• However, not more than 120 hours at
60 °C, and not more than 1 month at
40 °C
• Where possible, avoid storing in cold
locations below 0 °C and hot locations
above 40 °C.
• Ink quality may deteriorate if stored
outside these conditions.
0 to 40°C
• Ink quality may deteriorate if stored
outside these conditions.
*1. Depending on ink type
Restrictions Concerning the Machine
The ink expiration date is indicated on the Ink pack. Expired ink may cause ejection failures or alter the color
tone. Printing is possible even if the ink has passed its expiration date. Nevertheless, we recommend
replacing with new ink or using up as quickly as possible.

MIMAKI JV330 Series Specifications

General

Brand	MIMAKI
Model	JV330 Series
Category	Printer
Language	English