MIMAKI JV330 Series User Manual

Chapter 7 Maintenance
206
If sublimation transfer ink is used
• Replace the pinch rollers every month if used for approximately 12 hours per day.
• Replace the pinch rollers every two weeks if used 24 hours per day.
• Turn off the main power supply and unplug the power cable before replacing the pinch rollers.
1
Open the front cover.
2
Raise the clamp lever.
3
Remove the O-ring retaining the pinch rollers.
O-ring
O-ring
[JV/TS] [CJV]
• The pinch rollers are small. Be careful to avoid dropping them into the product interior.
4
Remove the pinch rollers or the pinch roller spindle.
Pinch roller spindle
Pinch roller
[JV/TS] [CJV]
5
Mount new pinch rollers, and secure them using the O-ring.
6
Close the front cover.
Media Holder Replacement
If the media holder becomes deformed and touches the carriage or print head, replace with a new media
holder.
• Turn off the main power supply and unplug the power cable before replacing the pinch rollers.

MIMAKI JV330 Series Specifications

General

Brand	MIMAKI
Model	JV330 Series
Category	Printer
Language	English