Chapter 5 Using the XY Slitter
148
3
Lower the XY clamp lever.
• The carriage moves over the platen.
Up the clamp lever of XY Slitter
• The XY carriage can be moved by hand when the XY clamp lever is lowered.
4
Move the LED pointer to the center of the mark at the right edge of the media, then press the
[ENTER] key.
Slit Position Detection
0.0 0.0
[1] 20.0
[2] 55.0
[3] 655.0
[4] 705.0
[5] 1305.0
Afterwards slitting mark
LED pointer position
To Next Page
Loading...
Need help?
General
