XI
11
Do not connect or disconnect the system’s power cord or its
accessories (e.g., a printer or a recorder) without turning
OFF the power first. This may damage the system and its
accessories or cause electric shock.
12
Do not turn OFF the power supply of the system during
printing, file storage or invoking other system operations. An
interrupted process may not be completed, and can become
lost or corrupted.
13
If the system is powered off improperly during operation, it
may result in data damage of the system’s hard disk or
system failure.
14
Do not use the system to examine a fetus in the Doppler
mode for a long period of time.
15
Do not use a USB memory device (e.g., a USB flash drive,
removable hard disk) which has unsafe data. Otherwise
system damage may result.
16
It is recommended to only use the video devices specified in
this manual.
17
Before using the ultrasound system to perform an exam,
please carefully read “Chapter 22 Acoustic Output”.
18
The auxiliary power outlet in the system is used to supply
power for approved peripheral devices. Do not connect
other/unapproved devices to this outlet; otherwise the rated
output power may be exceeded and the system failure may
result. Maximum output power of the outlet is 330VA.
NOTE: 1
Do not use the system in the vicinity of strong electromagnetic field (such as
a transformer), which may affect the performance of the system.
2
Do not use the system in the vicinity of high-frequency radiation source,
which may affect the performance of the system or even lead to failure.
To Next Page
Loading...
