Mindray DC-3

Image Modes
10-16
Baseline
This feature is used to accommodate the flow with quicker or slower speed to eliminate
alias.
z Click [Baseline] item in the menu.
z Select [Baseline] among 4 through -4.
SV
This feature is used to adjust the width of Sample Volume gate in the PW mode.
z Click [SV] in the menu.
z Select [SV] among 0.5 through 15.
Wall Filter
This feature is used to remove signals of low speed flow.
z Click [WF] in the menu.
z Change [WF].
Frequency
z Click [Frequency] in the menu.
z Select [Frequency] value.
Duplex and Triplex
z Duplex allows two modes to be active at the same time.
z Triplex allows three modes to be active at the same time.
z Select [Duplex] as [On] to turn on B + PW.
z Select [Triplex] as [On] to turn on B + PW + Color or B + PW + Power.
Colorize and Colorize Map
z Click [Colorize] in the menu to turn on / off the feature.
z Click [Colorize Map] in the menu to cycle through various map schemes.
z Changing Map will also change the color bar.
Dynamic Range
The Dynamic Range function is used to adjust contrast resolution of the image to
compress or expand the gray display range.
z Click [Dynamic Range] in the menu.
z Select a Dynamic Range value.
Audio
z Rotate [Volume] knob or click [Audio] in the menu.
z Change volume value of Doppler.
Trace Sensitivity
z Click [Trace Sensitivity] in the menu.
z Select [Trace Sensitivity] value.